The hoisting ring and the hoisting ring seat are connected with a pin shaft, the hoisting ring seat and the hook rod are welded into one body, the cylinder body and the hook body are connected by left-handed threads, and a stopper is used to prevent the threads from loosening. The hook body and the cylinder body can move up and down along the hook rod. The function of the inner and outer load springs is to make the vertical root unbuckle and bounce upwards when drilling.
The cylinder is filled with oil. The seat ring of the thrust bearing divides the oil cavity into two parts, and there are oil holes on the seat ring. Due to the damping effect of the oil flow, the shock and vibration of the hook body during the drilling operation can be absorbed, which can prevent the thread damage of the drill pipe joint.
The upper end of the cylinder is composed of 6 small springs and a positioning plate to form a positioning device. With the help of the friction between the positioning and the annular contact surface of the lifting ring seat, the lifting ring can be prevented from rotating when the empty elevator is lifted.





