Diamond bit in the drill and other supporting drilling equipment to complete the drilling task, as a drilling accessories cutting rock, it has a service life, so after each drilling should be timely maintenance and maintenance, and this is also related to the service life of the bit.
Electroplating maintenance and maintenance
Proper, timely maintenance also extends the life of electroplated bits and can significantly reduce drilling costs. Clean the electroplated bit's head body in time to see if there is any tire loss and rigid body cracking, as well as the degree of wear of the diamond section. This is the bit that needs to be replaced when the bit is unable to complete drilling and core sticking. If the electroplated bit has intact rigidbody and carcass, but is drilling inefficiently or slipping, it may be necessary to replace the 6-8 degree diamond bit of the gold drill, or to increase the footage efficiency by manually cutting out the carcass of the bit. To ensure that the plating bit maintains perfect footage efficiency during each use, it should be cleaned after each use.
Maintenance and maintenance of drill bit
Diamond composite bit is also a kind of geological diamond bit, there are two kinds of coring and no coring, but no matter which kind, it needs regular maintenance and maintenance. After each drilling, check the alloy wear condition of the bit. If the outer diameter strip wears more than 2/3, if the drill continues to be used, Will significantly affect drilling efficiency while accelerating core pipe and drill pipe wear rate, should replace the bit or re-weld alloy; Check whether the cutting composite piece of the drill head is seriously worn. When the remaining amount is less than 1/5, it can not be used anymore, and it needs to be replaced in time or resunk.
Although the price of diamond bits has been greatly reduced, saving drilling costs is always the goal that drillers should pursue. Timely maintenance of drill bits can not only achieve this, but also reduce the probability of drilling accidents.
